Parameter configuration:
1. Printing color number: monochrome;
2. Maximum mechanical speed: 80m / min;
3. Maximum printing speed: 60m / min;
4. Anilox roller: metal anilox rod (the number of lines selected by the customer is within 300 lines);
5. Registration accuracy: none;
6. Transverse: left and right adjustment± 5mm (manual);
7. Rewinding and unwinding: optional
8. Retracting and unwinding paper drum / rubber drum: none;
9. Embossing force: mechanical adjustment;
10. Embossing roller:φ 131.3mm；
11. Drying method: electric heating;
12. Drying power: 6kW;
13. Fan Oven: 45w12;
14. Main motor: 1.5kw reduction motor;
15. Main frequency converter: domestic frequency converter;
16. Inking motor: synchronous motor for inking;
17. Ordinary bearing: domestic;
18. One way bearing: domestic;
19. Aluminum alloy guide wheel is subject to hard oxidation, dynamic balance and static balance treatment;
20. Deviation correction system: none;
21. Tension control system: none;
22. Landing plate: pneumatic landing plate;
23. Main electrical appliances: Chint or Delixi;
24. Overall power (about) 9kw;
25. Print length range: 250mm-1000mm;
26. Plate thickness: 2.28 or 1.7mm (optional);
27. Maximum print width: 1700mm;
28. Maximum printing width: 1660mm;
29. Printing stick: one printing stick with a length of 300-400mm;
30. Printing materials: plastic, web paper and non-woven fabric;
31. Overall dimension (about): 2.2 long× Width 2.7× 2.5m high;
32. Weight (about): 2 tons.
Description of main features:
1. Simple operation, convenient operation, accurate color registration and long service life;
2. Adopt motor, variable frequency speed regulation, save power and small operation fluctuation;
3. The inking motor stops automatically when the plate falls, and the inking device starts automatically when the plate starts;
4. The ink supply mode is rubber roller scraping;
5. Special module spur gear transmission is adopted, and the printing size is accurate;
6. It is equipped with a blowing heating device, in which the heating is controlled by a central constant temperature control system;
7. The low bar is processed with steel, treated with special process and plated with hard chromium protective layer;
8. Aluminum alloy guide wheel shall be subject to hard oxidation, dynamic balance and static balance treatment;
9. It is equipped with cold air setting bellows, which can effectively prevent ink adhesion and other defects after printing;
10. Clear printing image, accurate folding and high yield;
11. Automatic counter, automatic stop when material is cut off, automatic ink transport when stopping, and automatic stop of ink transport motor during printing
